|
"NOTE" This may void your warranty, if it is still in affect.
Modifications cost:
$85
.
Modification pricing does not include return shipping. The very popular Classic ID, IDX * responds very favorably to modifications.
We add a receiver "Boost" circuit that adds about 2" to 2.5" recovery depth in the discriminate mode. This will allow your older IDX, ID to perform better than the newer "IDX PRO". We add a external "Threshold" control for aiding in "all metal" hunting. Boost circuit : This is a boost circuit we add to the receiver circuit, and it gives approximately 2" to 2.5" of depth improvement in the discriminate mode.
Classic IDX "Pro"
The below modifications do wonders for the new Pro's added target enhancement boost modification. Ground Balance: This will give you the ability to externally adjust your ground rejection as conditions warrant. This will aid in depth.
Threshold: This gives you a external adjustment of the threshold level you hear in the all metal mode, and ground balance procedures. Set properly to just hear a soft tone in your headphones will aid in finding those deep targets when operating in the "all metal" mode. Boost: We "Tweak" the sensitivity a bit while we have it apart on the bench. This will give you a small gain over the factory "Pro" settings Red lettering list modifications
Comment from satisfied user Jim Levite posted on forums 02/07/04 THANKS....JIM Email from Jim in answer to Surfscanner Detector's request to re-print Jim's post.
Hello Mr.Bill, |